Carefully select the most advanced materials from all over the world, from the selection of plant raw materials, production areas, varieties, planting climate, extraction process, etc. After inspection and manual screening, we use the strictest attitude to control each raw material of handmade soap.
Handmade soap is formed by saponification of "oil" and "alkali". Before preparing for production, we must adjust the temperature of all raw materials to achieve a uniform temperature to ensure the integrity of the saponification reaction.
Carefully add "oil" and "alkali" to the pot. This is dangerous in the process of making soap and requires very careful steps. Special care must be taken when using sodium hydroxide to avoid contact with human skin
We control the temperature below 42 °C throughout the whole process, and after a long period of time, the ingredients are tightly combined to make the texture of each handmade soap more detailed.
When the handmade soap reaches the optimum concentration, we fill it into a special mold. Well-designed molds allow the saponification reaction to be complete and smooth, and slowly form a solid soap.
After a few days, the appearance of the handmade soap looks solid, but in fact it is as soft as clay. At this time, we must carefully remove the heavy mold for the handmade soap by hand.
After one week, after the surface was slightly dry, the handmade soap began to enter the cutting stage. We put the soap on the exclusive cutting equipment designed by Ada`s Soap, and the specifications of each soap are equal.
The freshly cut handmade soap contains high moisture and the surface is smooth and sticky. At this time, we have to arrange the handmade soap neatly, and send it to the naturally air-dried dark room for rest, waiting for the handmade soap surface to dry.
Next is the complicated manual work to manually trim the sharp right angle of each handmade soap, so that the handmade soap can be used more smoothly.
Next, put the surface-trimmed handmade soap into the darkroom and wait patiently for a ripening period of 45 to 60 days.
At this point, the handmade soap is almost finished, we must wipe the small scum in the production process by hand, print the Ada's LOGO, and carry out quality management at each step through different manual processes.
The handmade soap to be finished must be tested for product. Handmade soap carefully prepared in each step, of course, must have good quality, quality control, and represent our goodwill.
After each step of inspection, we then applied the exclusive moisture-proof packaging to the handmade soap bag, marking and date on each handmade soap.
Finally, put in the exclusive handmade soap box of ADA'S SOAP, the golden coconut series beauty hand soap was finally completed. Throughout the three months, from raw materials, formula, production, to packaging, Indonesia's local architecture and religious features are fully demonstrated. From the inside out, through careful design, it has produced a good product representing Indonesia.
Indonesian Native Plant Extracts
16 functional exclusive skin formulas, skin care products
42 ° C low temperature cold technology, exclusive 8% oil removal in method, 60 days dark room ripening
Professional Technology Exclusive Formula
Indonesian plant extract
skin-specific formula
low-temperature cooling technology
Vegetable oil is naturally saponified and cannot be processed twice. Heating will only carbonize.
Suitable for secondary processing, DIY, low melting point, melting immediately and dripping.
1. Low temperature manufacturing, complete retention of natural activity of each ingredient.
2. Natural saponification process, so that each soap is rich in dry plant oil.
3. No preservatives, chelating agents, soaps, soft, smooth and lasting.
Retain most Plants Nutritions.
Rich in natural Glycerin.
Non-irritation, High Moisture retention.
Soap Foam.
Low Temperature Processing, long maturity period.
[Cooling Process Method] When Manufacturing, it is only necessary to heat the fats to a certain temperature without reheating, because the reaction between the fats and alkali can produce enough temperature, after the soap thickens up, we will pour it into the mold, The product can only be completed after 4 to 6 weeks of ripening.
Advantages: The temperature rise is small, reducing damage of the raw material, rich in natural Glycerin, most gentle, good moisture.
Disadvantages: It takes 4 to 6 weeks to mature before it can be used. The manufacturing process is numerous and expensive.
Short process, no need to wait for ripening.
Only in small amount, or no Glycerin.
High temperature easily destroy natural nutrients.
High Cleansing ability.
Long Shelf Life.
[Hot Process Method]The basic principle is to speed up the production process by allowing the water in the soap to completely evaporate using the temperature of 80 to 85 degrees. The advantage is that after a few hours of cooling, you can use it right away.Short delivery period and low cost, however, because of the high temperature, the natural properties of the raw materials are destroyed.
Advantages: Fast manufacturing and long shelf life of soap.
Disadvantages: The high temperature of manufacture causes the natural ingredients of the raw material easily destroyed.
Made from chemical synthetic raw materials.
Simple process and fast production.
The soap structure is loose and fragile.
The quality of the raw material is difficult to master.
Plenty of Shapes and Colorful.
Most of the commercially available soaps are made by this method. This is the easiest way to make soap. The method is the same as the surface of the text. After heating and melting, add the desired flavor and pigment, and pour it into the model. finished. (Soap-based melting method) The biggest feature is that it can make handmade soaps with different appearances, different colors and appearances. However, the disadvantage is that many soap-based raw materials are still added with artificial synthetic materials, and therefore, it is almost impossible to clearly control. The correct ingredients, quality and efficacy contained in the products produced cannot be mastered.
Advantages: no need to wait, as long as it can be used for cooling, it can make transparent, colorful soap.
Disadvantages: Quality is difficult to control due to unknown raw materials and ingredients. The structure of the soap body is loose and easy to soft.
Alcohol free
Animal oil free
Mineral-free oil
Surfactant free
Preservative free
Fragrance-free
Golden Coconut Beauty Handmade Soap is all handmade and it is a skin-care formula designed to solve various skin problems. Whether it is greasy skin or dry skin and scaling, it can be adjusted from the scalp to the face to the whole body.
We only use pure plant-based, 100% natural materials, and mainly Indonesian native plants, without using any animal raw materials, preservatives, alcohol, artificial aroma.Each soap is pure and mild for pregnant women, toddlers, and sensitive skin could usethis with confidence.
We manufacture it with a 42°C low temperature manufacturing method with high difficulty, and control the temperature throughout the whole process to avoid high temperature and damage the rich nutrients of natural materials.
Do you know that most commercially available soaps have no glycerin? Glycerin is a by-product of the natural production of soap. This ingredient has a larger specific gravity than other raw materials, so it must be constantly stirred to blend in with other ingredients. Many manufacturers have omitted this agitation step to allow glycerin to drain itself. Our natural handmade soaps retain all the natural glycerin that is produced during the making process, giving our soap a soft, moisturizing texture after washing.
In the manufacturing process, we use an exclusive 8% super fatting method to make the soap more gentle and soft to the skin, so that each piece of gold coconut beauty hand soap has a silky touch.
The foam produced by the synthetic raw materials is neither fine nor long-lasting. Golden Coconut Beauty Handmade Soap is a rich natural soap, which is dense, delicate, rich and lasting. Suitable for whole body skin, including facial skin, hair. Our soap will absolutely make you satisfy.
Since our soap is 100% natural, it is definitely suitable for all types of skin, including sensitive skin. However, we still want to remind you that some essential oils will still cause allergic reactions to some people. If you have such a situation, please stop using the product and try our other handmade soaps.
Our products are absolutely free of artificial preservatives, catalysts or artificial colors. SLS, SLES cleaning products must take 3 months or more to complete the biodegradation process, and the sterilization work needs to be done in the most time-consuming and labor-intensive way. Conversely, our soap is converted to carbon dioxide and water within 24 hours of its disappearance.